| Maximum Operating Temperature | 113ºF(45ºC) |
| Maximum Working Pressure | 600psi(41.0 bar) |
| The high pressure drop | 15psi (1.0bar) |
| Continuously operating PH range a | 3-10 |
| Short wash PH range (30min) b | 2-12 |
| Maximum feed water SDI | SDI 5 |
| Tolerance Of Free Chlorine | <0.1ppm |
| Maximum pressure drop for single membrane element | 15psi(0.1Mpa) |
- When PH is above 10, the Maximum Temperature of Continuous
Operation is 35ºC.
- Under certain conditions, the presence of free chlorine and other
oxidants in the water may cause serious membrane damage, which
doesn't belong to product warranty range.
An Industrial RO System continues to filter water till the tank is
full so shuts off. Once you switch on your drinkable regulator,
water comes out of the tank through another post-filter to shine
drinkable before it gets to your regulator.
Reverse osmosis plants require a variety of pre-treatment
techniques including softening, dechlorination, and anti-scalent
treatment. Following pre-treatment, high levels of pressure send
water through a semi-permeable membrane, which retains all
contaminants but lets pure water pass through. Energy requirements
depend on the concentration of salts and contaminants in the
influent water, higher concentrations requires more energy to
treat.
DIMENSION
2540:A:1016mm B:60.6mm C:19mm D:33mm
We have over 20 years experiences in RO/UF water treatment and famous in China specially in Asia.
1.We specialized in RO membrane over 18 years,focus on offering
good service.
2.Over 18 years experience in the RO products,auto-matic production
line
3.OEM and ODM order accepted.
4.Strict QC process to make sure each membrane with good quality,
will be tested before shipment.
5.Various combination meet all the customized need
6.A good team with technical department, production
department,sales department and after sales service department.
FAQ:
Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30%
deposit before producing, 70% balanced against the copy of B/L.
Q: What is the delivery time?
A: Usually within 15days. Also depends on order quantities.
Q: Can the package be customized by our own logo ?
A: Yes, the package can be customized your logo, but the MOQ will
be higher for which we can discuss as per the specific orders.
Q: How to install after the products arriving destination?
A: We will provide detailed illustrations to you. And we can also
provide guide to your workers how to use it and how to maintain
it.
Q:What's the certification do you have?
A: We have NSF, ISO9001, OHSAS18001, ISO14001 Certifications.
